The IFM E10190 is a 2 m connecting cable with an angled socket for sensors using a 1/2-inch connector. It uses a yellow PVC cable with three AWG22 conductors and approximately 5.2 mm outside diameter. The connector body is black TPU with a nickel-plated brass locking nut. It supports 250 V AC and 300 V DC with IP67 protection. Its angled construction provides improved cable routing where installation space is restricted.
The angled socket reduces the amount of space required directly behind the sensor. The 1/2-inch connector provides the specified sensor interface. The black TPU body provides a flexible connection structure. A nickel-plated brass nut secures the connection. The arrangement is suitable for machine installations with restricted clearance.
The cable length is 2 m. It uses three AWG22 conductors with approximately 42 × 0.1 mm strand construction. The cable diameter is approximately 5.2 mm. The yellow PVC jacket provides conventional industrial cable insulation. The cable is suitable for drag-chain applications.
The cable supports 250 V AC and 300 V DC. IP67 protection provides protection against dust and water ingress. It operates from -25 to 90 °C. The cable supports more than two million bending cycles under specified drag-chain conditions. The design is suitable for industrial automation applications.
E10190
ADOAA030MSS0002E03
2 m cable
1/2-inch connector
Angled socket
Yellow PVC cable
3 × AWG22
Ø5.2 mm cable
TPU black body
Nickel-plated brass nut
250 V AC
300 V DC
IP67
-25…90 °C
Drag-chain suitable
2 million bending cycles
10 × cable diameter bending radius
3.3 m/s travel speed
±180°/m torsional strain
Industrial sensors
Machine automation
Drag-chain wiring
Factory automation
Diagnostic systems
Control equipment
Production machinery
Packaging equipment
Mobile machine wiring
Sensor interfaces
The angled body simplifies routing in restricted spaces. The 2 m length supports standard machine connections. Drag-chain capability supports repeated movement. IP67 protection improves environmental reliability. The robust TPU/brass construction supports repeated industrial connection.
Maintain the minimum bending radius. Route the cable through a suitable drag chain when required. Avoid twisting the cable excessively. Tighten the locking nut correctly. Inspect the cable for wear after repeated movement.
| Specification | E10190 |
|---|---|
| Product type | Connecting cable with socket |
| Order number | E10190 |
| Model | ADOAA030MSS0002E03 |
| Cable length | 2 m |
| Sensor connection | 1/2 inch |
| Socket design | Angled |
| Cable material | PVC |
| Cable colour | Yellow |
| Conductors | 3 |
| Conductor size | AWG22 |
| Strand construction | 42 × Ø0.1 mm |
| Cable diameter | 5.2 mm |
| Body material | TPU |
| Body colour | Black |
| Nut material | Brass |
| Nut finish | Nickel-plated |
| AC voltage | 250 V |
| DC voltage | 300 V |
| Protection | IP67 |
| Temperature | -25…90 °C |
| Bending radius | ≥10 × diameter |
| Travel speed | ≤3.3 m/s |
| Horizontal travel | 5 m |
| Maximum acceleration | 5 m/s² |
| Bending cycles | >2 million |
| Torsional strain | ±180°/m |
| Pack quantity | 1 |
| Primary application | Industrial automation |
Browse product families and jump into the exact catalog section you need.